Laser hair removal may seem like a simple procedure that takes only about 10 minutes, but in reality, many factors affect the result.

 

Hair thickness, skin tone, treatment area, laser wavelength, the amount of energy delivered, and how well the skin surface is protected all matter.

 

One part that many people overlook is cooling.

1.png

Cooling is often thought of simply as a way to make the procedure less painful, but in practice, it is an important condition for protecting the epidermis while delivering the necessary energy to the hair follicle in a stable way.

 

Simply put, laser hair removal is not a procedure where stronger energy is always better. It is a treatment that protects the skin while accurately delivering the necessary heat to the hair follicle :)

 

How does laser hair removal work?

 

The basic principle of laser hair removal is selective photothermolysis.

 

Hair contains a large amount of melanin pigment.

 

When a laser of a specific wavelength is absorbed by this melanin, light energy is converted into heat. This heat is then delivered to the structures around the hair follicle, gradually making the hair thinner and slowing down its growth.

 

That is why thicker, darker hair tends to respond better to laser treatment.

 

Areas such as the underarms, bikini line, and male beard often respond relatively well because the hair is thick and dark, meaning there is enough melanin for the laser to target.

 

On the other hand, very fine vellus hair, white hair, or hair close to blonde may respond less because it contains less melanin.

 

Another important point is the hair growth cycle.

 

Not all hairs grow in the same phase at the same time. Hair repeatedly goes through the anagen, catagen, and telogen phases.

 

Laser treatment responds better to hair in the anagen phase, so one session cannot remove all hair at once. Instead, treatment needs to be repeated at regular intervals to continue targeting hairs as they enter the growth phase.

 

That is why laser hair removal is closer to a treatment that gradually reduces hair over multiple sessions according to the hair cycle, rather than a one-time procedure.

 

Why cooling is as important as wavelength and energy

2.png

One of the commonly used wavelengths in laser hair removal is the 755 nm alexandrite laser.

 

The 755 nm alexandrite wavelength is well absorbed by the melanin in hair, so it can be expected to show a good response in thick, dark hair.

 

However, there is one important point to consider here.

 

Being well absorbed by melanin is an advantage for targeting hair, but it also means that the melanin in the skin surface may be affected to some degree.

 

Especially if the skin tone is darker, if there is pigmentation, or if the skin has recently been tanned, the epidermis may also be affected by heat.

 

This is where cooling becomes important.

 

Cooling helps reduce the heat burden on the skin surface before and after laser delivery.

 

In other words, it helps deliver the necessary heat to the hair follicle while preventing the epidermis from becoming excessively hot.

 

So cooling is not just an additional step to reduce pain.

 

It is an important treatment condition for protecting the epidermis, reducing the risk of heat injury, and delivering the necessary energy stably within the range that the skin can tolerate.

 

At our clinic, we use the air cooling system of Apogee Elite Plus, and when needed, we also combine it with direct cooling using ice packs.

 

This approach is not simply for using stronger energy.

 

It is a process that reduces heat sensation on the skin surface, protects the epidermis, and helps deliver the necessary energy to the hair follicle more stably.

 

How did the study explain cooling?

3.png

The study referenced here was published by Nisticò and colleagues in Lasers in Medical Science in 2020.

 

The title of the paper is “Long-pulsed 755-nm alexandrite laser equipped with a sapphire handpiece: unwanted hair removal in darker phototypes.”

 

This study was conducted on 16 patients with Fitzpatrick skin types IV–VI, meaning relatively darker skin phototypes.

 

The study used a long-pulsed 755 nm alexandrite laser equipped with a cooled sapphire handpiece. A total of four treatments were performed at intervals of 4 to 6 weeks, and the results were evaluated 3 months after the final treatment.

 

Treatment areas included the underarms, arms and legs, face, and groin.

 

There are two important points in this study.

 

First, when using a 755 nm alexandrite laser in darker skin phototypes, cooling was mentioned as an important protective condition.

 

Second, the study presented hair removal results by treatment area in graph form, making it useful as a visual reference for this column.

 

Which areas responded better in the study graph?

4.png

Results after 3 months

 

The graph above shows the hair removal effect by treatment area 3 months after treatment.

 

In the graph, the face was scored 3.7, the groin 4.0, the underarms 4.1, and the arms and legs 3.6.

 

In this study, the hair removal effect score was categorized based on the hair reduction rate.

 

A score of 0 meant less than 25% reduction, 1 meant 25–50% reduction, 2 meant 51–75% reduction, 3 meant 76–90% reduction, and 4 meant more than 90% reduction.

 

In the graph, all areas showed scores in the high 3 range to around 4, with particularly high scores in the underarms and groin.

 

Simply put, under the conditions of this study, areas such as the underarms and groin, where the hair tends to be relatively thick and dark, showed better responses.

 

This is also a pattern we often see in actual clinical practice.

5.JPG

Thick, dark hair can respond well because it contains more melanin for the laser to target.

 

On the other hand, fine facial hair or thinner hair on the arms and legs may show different responses depending on hair thickness and density.

 

That is why even when the same device and the same number of sessions are used, satisfaction can vary depending on the treatment area.

 

Areas with many thick hairs, such as the underarms, may feel like they respond relatively quickly.

 

Areas such as the face or arms, where the hair may be thinner or mixed in thickness, may require more delicate settings and repeated treatments.

 

Why was cooling emphasized in this study?

 

In the conclusion of the paper, the authors explained that sapphire contact cooling helps reduce the risk of serious side effects caused by overheating of the skin.

 

This is the most important point in a laser hair removal column.

 

Laser hair removal works by delivering heat to the hair follicle.

 

However, if the skin surface overheats, problems such as redness, burning sensation, blisters, and pigmentation may occur.

 

Especially in people with darker skin tones, epidermal melanin can absorb more laser energy, so protecting the epidermis becomes even more important.

 

That is why cooling is not just a device for reducing pain.

 

It is a key process that lowers the heat burden on the epidermis, protects the skin surface, and allows the necessary energy to be delivered to the hair follicle.

 

This is also why our clinic considers both air cooling and direct cooling.

6.JPG

The device’s indirect cooling helps lower the skin surface temperature during the procedure, and when needed, direct cooling with ice packs helps further control heat sensation and pain response.

 

From the patient’s perspective, this reduces the burden of pain. From the clinician’s perspective, it allows more stable energy delivery while monitoring the skin response.

 

Precautions after laser hair removal

 

After laser hair removal, temporary redness, stinging, swelling around the hair follicles, heat sensation, and itching may occur.

 

Most of these symptoms settle with time, but if blisters, oozing, severe pain, or wide color changes occur, the clinic should be contacted.

제목을 입력해주세요. - 2025-12-02T102827.370.png

It is better to avoid tanning before and after the procedure.

 

When the skin becomes darker, the melanin in the epidermis may absorb more laser energy, which can increase the risk of burns or pigmentation.

 

Before treatment, hair removal methods that pull out the hair, such as waxing or tweezing, should be avoided.

 

Because the laser targets the melanin in the hair root and hair shaft, removing the hair from the root can reduce the structure that the laser needs to react with.

 

Before the procedure, shaving is usually recommended.

 

On the day of treatment, it is better to avoid activities that increase heat sensation, such as sauna, hot baths, and excessive exercise. Moisturizing the treated area is also helpful.

 

If the treated area is exposed to sunlight, UV protection is important as well.

 

To summarize, the effect of laser hair removal is not determined simply by how many sessions you receive.

8.gif

Hair thickness, skin tone, treatment area, wavelength, energy, cooling, and treatment interval all affect the result.

 

In the 2020 study by Nisticò and colleagues, a 755 nm alexandrite laser equipped with a cooled sapphire handpiece was used in patients with skin types IV–VI. After four treatments, the study showed high hair removal responses by treatment area at the 3-month follow-up.

 

In particular, the graph showed high scores in the underarms and groin. The paper also explained that sapphire contact cooling helps reduce the risk of serious side effects caused by skin overheating.

 

In other words, cooling is not simply a process for making the procedure less painful.

 

It is an important condition for protecting the epidermis while delivering the necessary heat to the hair follicle in a stable way.

At our clinic, we use the air cooling system of Apogee Elite Plus together with direct cooling using ice packs to reduce the heat burden on the skin surface and perform treatment according to the skin response of each area.

 

Good hair removal results do not come from “strong energy” alone.

 

They come from accurately designing the wavelength, energy, cooling, and treatment interval according to the condition of the skin and hair.

 

If you are considering laser hair removal, it is better to look not only at the device name, but also at whether the settings and cooling management are properly adjusted to your skin and hair :)

 

This was Director Won Dae-han.

 

Thank you for reading.

 

Source:
Nisticò SP, Bennardo L, Del Duca E, Tamburi F, Rajabi-Estarabadi A, Nouri K.
Long-pulsed 755-nm alexandrite laser equipped with a sapphire handpiece: unwanted hair removal in darker phototypes.
Lasers in Medical Science. 2020. DOI: 10.1007/s10103-020-03004-3.

TOP

Journey of Beauty
PRIMI CLINIC

image
promo
  • KakaoTalk
  • Whatsapp
  • Blog Blog Blog
  • Phone
  • KakaoTalk
  • Whatsapp
  • Phone